THE DANGRpack ARCHIVE
Real parts.
Real progress.
Every good idea starts somewhere.
Here's ours, from the workbench.
Physical prototypes, early fit studies and the details behind DANGRpack. These are our actual development photos.
See how the setup works
01 / Prototype
The idea takes shape
An actual DANGRpack sample. Olive fabric, yellow webbing and the first look at the finished silhouette.
02 / Prototype
A look inside
The open prototype shows how the keg and tubing sit inside the bag. Final clearances and loaded fit remain to be verified.
03 / Prototype
From another angle
An early sample on the workbench, with the DANGR patch alongside it.
04 / Hardware
Under the hood
The reference hardware: keg, CO2 cylinder, regulator and tubing. This photo records the prototype setup; it does not establish final component compatibility.
05 / Prototype
The first branded sample
The branded bag starts to look like DANGR. A physical sample from the October 2023 development archive.
06 / Details
The little details
Brand details and the small accessories that inspired the project.
07 / Development
Before the DANGR sample
An early fit study using a third-party bag. Shown as development history, not as a DANGR product or endorsed carry configuration.
08 / Development
Where it began
A workbench snapshot from the early beverage-backpack experiments.
LOOK A LITTLE CLOSER
What's inside
the idea?
Follow the path from CO2 cylinder to serving tap. Our illustrated overview explains the components and the preparation a DIY keg setup needs.
Diagram & setup guide